Assessment of Directionally Solidified Eutectic Sm–Fe(Co)–Ti Alloys as Permanent Magnet Materials

Simple item page
dc.contributor.authorGabay, Alexander M.
dc.contributor.authorHan, Chaoya
dc.contributor.authorNi, Chaoying
dc.contributor.authorHadjipanayis, George C.
dc.date.accessioned2023-09-13T13:36:09Z
dc.date.available2023-09-13T13:36:09Z
dc.date.issued2023-05-29
dc.descriptionThis article was originally published in IEEE Transactions on Magnetics. The version of record is available at: https://doi.org/10.1109/TMAG.2023.3280849. © 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. This article will be embargoed until 05/29/2025.
dc.description.abstractSm–Fe–Ti and Sm–Fe 0.8 Co 0.2 –Ti alloys were prepared via arc-melting and directionally solidified on a water-cooled copper hearth. The as-solidified alloys featured cells of the Sm(Fe,Co,Ti) 12 –Ti(Fe,Co) 2+δ –(α-Fe) lamellar eutectic. The lamellae of Sm(Fe,Co,Ti) 12 phase with a crystal structure of the ThMn12 type were less than 0.2 μm thick, and had their [001] easy-magnetization directions oriented along the temperature gradient of the solidification. The eutectic microstructure led to an increased coercivity, especially in the Co-added alloys. Below 250 °C, this coercivity was found not to vary much with temperature with a temperature coefficient of -0.18 %/°C. However, the modest absolute values, reaching only 0.7 kOe, are insufficient for utilization of the directionally solidified alloys as anisotropic permanent magnets.
dc.description.sponsorship10.13039/100000015-U.S. Department of Energy (Grant Number: DE SC0022168)
dc.identifier.citationA. M. Gabay, C. Han, C. Ni and G. C. Hadjipanayis, "Assessment of Directionally Solidified Eutectic Sm–Fe(Co)–Ti Alloys as Permanent Magnet Materials," in IEEE Transactions on Magnetics, doi: 10.1109/TMAG.2023.3280849.
dc.identifier.issn1941-0069
dc.identifier.urihttps://udspace.udel.edu/handle/19716/33296
dc.language.isoen_US
dc.publisherIEEE Transactions on Magnetics
dc.subjectmagnetic materials
dc.subjectmetallurgy
dc.subjectpermanent magnets
dc.subjectsamarium compounds
dc.subjectThMn12 type
dc.titleAssessment of Directionally Solidified Eutectic Sm–Fe(Co)–Ti Alloys as Permanent Magnet Materials
dc.typeArticle

Files

Original bundle

Now showing 1 - 1 of 1
Thumbnail Image
Name:
Assessment of Directionally Solidified Eutectic.pdf
Size:
1.47 MB
Format:
Adobe Portable Document Format
Description:
Main article
Download

License bundle

Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
2.22 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Open Access Publications - Department of Physics and Astronomy
Open Access Publications - Materials Science and Engineering