Imidazolium-Based Sulfonating Agent to Control the Degree of Sulfonation of Aromatic Polymers and Enable Plastics-to-Electronics Upgrading
Date
2024-07-03
Journal Title
Journal ISSN
Volume Title
Publisher
JACS Au
Abstract
The accumulation of plastic waste in the environment is a growing environmental, economic, and societal challenge. Plastic upgrading, the conversion of low-value polymers to high-value materials, could address this challenge. Among upgrading strategies, the sulfonation of aromatic polymers is a powerful approach to access high-value materials for a range of applications, such as ion-exchange resins and membranes, electronic materials, and pharmaceuticals. While many sulfonation methods have been reported, achieving high degrees of sulfonation while minimizing side reactions that lead to defects in the polymer chains remains challenging. Additionally, sulfonating agents are most often used in large excess, which prevents precise control over the degree of sulfonation of aromatic polymers and their functionality. Herein, we address these challenges using 1,3-disulfonic acid imidazolium chloride ([Dsim]Cl), a sulfonic acid-based ionic liquid, to sulfonate aromatic polymers and upgrade plastic waste to electronic materials. We show that stoichiometric [Dsim]Cl can effectively sulfonate model polystyrene up to 92% in high yields, with minimal defects and high regioselectivity for the para position. Owing to its high reactivity, the use of substoichiometric [Dsim]Cl uniquely allows for precise control over the degree of sulfonation of polystyrene. This approach is also applicable to a wide range of aromatic polymers, including waste plastic. To prove the utility of our approach, samples of poly(styrene sulfonate) (PSS), obtained from either partially sulfonated polystyrene or expanded polystyrene waste, are used as scaffolds for poly(3,4-ethylenedioxythiophene) (PEDOT) to form the ubiquitous conductive material PEDOT:PSS. PEDOT:PSS from plastic waste is subsequently integrated into organic electrochemical transistors (OECTs) or as a hole transport layer (HTL) in a hybrid solar cell and shows the same performance as commercial PEDOT:PSS. This imidazolium-mediated approach to precisely sulfonating aromatic polymers provides a pathway toward upgrading postconsumer plastic waste to high-value electronic materials.
Description
This article was originally published in JACS Au. The version of record is available at: https://doi.org/10.1021/jacsau.4c00355. Copyright © 2024 The Authors. Published by American Chemical Society
This research was featured in UDaily on 07/18/2024 at: https://www.udel.edu/udaily/2024/july/plastic-upcycling-kayser-laure-chemistry-polystyrene-pedotpss/
Keywords
sulfonation, plastic upgrading, polyelectrolytes, electrophilic aromatic substitution, PEDOT:PSS, organic electrochemical transistors, hybrid solar cells
Citation
Lo, Chun-Yuan, Kelsey P. Koutsoukos, Dan My Nguyen, Yuhang Wu, David Alejandro Angel Trujillo, Tabitha Miller, Tulaja Shrestha, et al. “Imidazolium-Based Sulfonating Agent to Control the Degree of Sulfonation of Aromatic Polymers and Enable Plastics-to-Electronics Upgrading.” JACS Au 4, no. 7 (July 22, 2024): 2596–2605. https://doi.org/10.1021/jacsau.4c00355.