Browsing by Author "Stone, D. H."
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Effect of Increasing Axle Loads on Rail Fatigue Life(British Rail Research ( Part of the Old British Rails), 1983) Zarembski, Allan M.; Stone, D. H.; Wells, T. R.; Armstrong, R. A.This report presents an investigation into the effects of increasing axle loads on the fatigue life of tangent, continuous welded rail (CWR). Two independent studies were conducted. The first utilized a statistical analysis technique, which obtained probability distribution curves for rail defect data. The second utilized a fatigue analysis methodology for the prediction of rail service life. Both techniques have shown good correlations between calculated results and service experience. The results of both analyses show that increasing the axle load results in an increased incidence of rail defect occurrences, with a corresponding decrease in rail fatigue life for tangent CWR. This reduction is by about 40% of the life of the rail, in million gross tons (MGT), when the loading is increased from 70-ton cars (200,000 lb.) to 100-ton cars (263,000 lb.). This effect, which is seen for both heavy (132 lb.) and medium (119 lb) rail sections, is quite significant, and must be taken into account in future studies and economic analyses.Item Impact of Car Loads on Rail Defect Occurrences(American Railway Engineering Association, 1982-09) Armstrong, R. A.; Wells, T. R.; Stone, D. H.; Zarembski, Allan M.Rail defect data gathered from different sites with widely varying loading environments were analyzed with respect to defect occurrence trends. The principal loading characteristic investigated was the predominant car capacity, which determined the wheel loads and the subsequent loading of the rail. Results show that the more severe the car loading, the earlier in rail life the defects occur. A secondary loading characteristic investigated was the effects of curvature. Results were mixed, indicating that other factors also need to be considered.