Browsing by Author "Barua, Sattajit"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Electrophoretic Deposition as a Versatile Low-Cost Tool to Construct a Synthetic Polymeric Solid-Electrolyte Interphase on Silicon Anodes: A Model System Investigation(ACS Applied Materials and Interfaces, 2024-02-14) Mou, Rownak J.; Barua, Sattajit; Prasad, Ajay K.; Epps, Thomas H. III; Yao, Koffi P. C.The cycling of next-generation, high-capacity silicon (Si) anodes capable of 3579 mAh·g–1 is greatly hindered by the instability of the solid-electrolyte interphase (SEI). The large volume changes of Si during (de)lithiation cause continuous cracking of the SEI and its reconstruction, leading to loss of lithium inventory and extensive consumption of electrolyte. The SEI formed in situ during cell cycling is mostly composed of molecular fragments and oligomers, the structure of which is difficult to tailor. In contrast, ex situ formation of a synthetic SEI provides greater flexibility to deposit long-chain, polymeric, and elastomeric components potentially capable of maintaining integrity against the large ∼350% volume expansion of Si while also enabling electronic passivation of the surface for longer cycling and calendar life. Furthermore, polymers are amenable to structural modifications, and the desired elasticity can be targeted by selection of the SEI polymer feedstock. Herein, electrophoretic deposition (EPD) is used to apply chitosan as a synthetic SEI on model Si thin film electrodes. Comparison of synthetic SEIs obtained without (Si/Chit) and with CH3COOLi (Si/Chit+CH3COOLi) added during EPD is performed to demonstrate a facile route to tuning of the polymer SEI chemistry. Atomic force and scanning electron microscopy reveal that addition of CH3COOLi at EPD assists in conformal deposition of the synthetic SEI. During electrochemical cycling, the Chit+CH3COOLi coating nearly doubles the capacity retention versus the reference bare Si thin film. X-ray photoelectron and Fourier transform infrared spectroscopy reveal that CH3COOLi caps the −NH2 groups of chitosan through amidation during EPD, which suppresses the catalytic reduction of the electrolyte. The presented approach demonstrates and validates EPD as a low-capital route to achieving and chemistry-tuning synthetic SEIs on Si electrodes. More broadly, the method is a promising avenue toward controlled and tailored polymeric SEIs on various conversion-type electrodes with high particle volumetric expansion.Item Unraveling Morphology and Chemistry Dynamics in Fluoroethylene Carbonate Generated Silicon Anode Solid Electrolyte Interphase Across Delithiated and Lithiated States: Relative Cycling Stability Enabled by an Elastomeric Polymer Matrix(Journal of The Electrochemical Society, 2024-04-25) Mou, Rownak J.; Barua, Sattajit; Abraham, Daniel P.; Yao, Koffi P. C.The silicon solid electrolyte interphase (SEI) faces cyclical cracking and reconstruction due to the ∼350% volume expansion. Understanding the SEI dynamic morphology and chemistry evolution from delithiated to lithiated states is thereby paramount to engineering a stable Si anode. Fluoroethylene carbonate (FEC) is a preferred additive with widely demonstrated enhancement of the Si cycling. Thus, insights into the dynamics of the FEC-SEI may provide hints toward engineering the Si interface. Herein, complementary ATR-FTIR, AFM, tip IR, and XPS probing reveal the presence of an elastomeric polycarbonate-like matrix in the FEC-generated SEI which is absent from the FEC-free SEI. Adding FEC to the baseline 1 M LiPF6 in EC:EMC (1:1) electrolyte promotes formation of a thinner and more conformal SEI, and subdues morphology and chemistry changes between consecutive half-cycles. From AFM, morphological stabilization of the FEC-SEI occurs earlier. Furthermore, conventional SEI biproducts such as Li2CO3 and LiEDC appear in reduced quantities in the FEC-SEI implying a reduced quantity of Li-consuming species. The thin polymeric FEC-SEI enables deeper (de)lithiation of silicon. In conclusion, the enhanced mechanical compliance, chemical invariance, and reduced Li inventory consumption of the FEC-SEI are logically the key features underlying the Si cycling enhancement by FEC.