Mahajan, Jignesh S.Hinton, Zachary R.Nombera Bueno, EduardoEpps, Thomas H. IIIKorley, LaShanda T. J.2024-05-302024-05-302024-04-02Mahajan, Jignesh S., Zachary R. Hinton, Eduardo Nombera Bueno, Thomas H. Epps, Iii, and LaShanda T. J. Korley. “Lignin-Derivable, Thermoplastic, Non-Isocyanate Polyurethanes with Increased Hydrogen-Bonding Content and Toughness vs. Petroleum-Derived Analogues.” Materials Advances 5, no. 9 (2024): 3950–64. https://doi.org/10.1039/D4MA00039K.2633-5409https://udspace.udel.edu/handle/19716/34432This article was originally published in Materials Advances. The version of record is available at: https://doi.org/10.1039/D4MA00039K. © 2024 The Author(s). Published by the Royal Society of ChemistryThe functionality inherent in lignin-derivable bisguaiacols/bissyringols can improve the processability and performance of the resulting polymers. Herein, non-isocyanate polyurethanes (NIPUs) were synthesized from bisguaiacols/bissyringols with varying degrees of methoxy substitution and differing bridging groups. Notably, the presence of increasing numbers of methoxy groups (0, 2, and 4) in bisphenol F (BPF)-, bisguaiacol F (BGF)-, and bissyringol F (BSF)-NIPUs led to higher percentages of hydrogen-bonded –OH/–NH groups (i.e., ∼65%, ∼85%, ∼95%, respectively). Increased hydrogen bonding between chains improved the elongation-at-break (εbreak) and toughness of lignin-derivable NIPUs over their petroleum counterparts without a reduction in Young's moduli and tensile strengths. For example, BSF-NIPU exhibited the highest εbreak ∼210% and toughness ∼62 MJ m−3, followed by BGF-NIPU (εbreak ∼185% and toughness ∼58 MJ m−3), and then BPF-NIPU (εbreak ∼140% and toughness ∼42 MJ m−3). Similar trends were found in the dimethyl-substituted analogues, particularly for the bisphenol A-NIPU and bisguaiacol A-NIPU. Importantly, the melt rheology of the lignin-derivable NIPUs was comparable to that of the petroleum-derived analogues, with a slightly lower viscosity (i.e., improved melt flow) for the bio-derivable NIPUs. These findings suggested that the added functionalities (methoxy groups) derived from lignin precursors improved thermomechanical stability while also offering increased processability. Altogether, the structure–property-processing relationships described in this work can help facilitate the development of sustainable, performance-advantaged polymers.en-USAttribution-NonCommercial 4.0 InternationalArticle